Showing posts with label Installation. Show all posts
Showing posts with label Installation. Show all posts

Sunday, February 26, 2012

DIRECTV Installation Guide - What You Should Know

After you order your DIRECTV service you'll receive a free satellite TV system including free installation in up to four rooms of your home by a professional installer. Your DIRECTV installation will be scheduled anywhere from one to five days after you place your order.

Here's the equipment you get for free:

Dish Network

DISH Network Satellite TV System

DIRECTV Installation Guide - What You Should Know

* A satellite TV dish - captures the satellite signal broadcast from a DISH Network satellite.

* An LNB (low noise block) converter - converts the signal and transmits it to a receiver.

* A Satellite TV receiver - amplifies and decodes the satellite signal then sends it to a TV.

DIRECTV Installation

The first thing you need to do is to make sure you have a clear line of sight to the southern sky so your satellite dish can capture the satellite signal. If you don't, you'll have to clear any obstructions to prepare for the installation. (Call your installer if you're in doubt about this.)

After your installer determines the best location for your dish, he or she will do the following:

* Mount your satellite TV dish on the roof, a porch, or an exterior wall of your home.

* Ground the dish in order to prevent lightning damage.

* Install the cable through an outside wall and run it through your inside walls to your receiver locations.

* Connect your receivers to the satellite dish and connect a phone line from a receiver to a telephone jack.

* Aim your dish at the DIRECTV satellite, checking azimuth (direction), skew (rotation), and elevation (angle) in order to get maximum reception.

* Activate your DIRECTV satellite TV account for you.

* Check the satellite TV receivers and remote controls to make sure they work properly.

* Explain how your system works, show you how to operate your receiver and your remote controls, then answer any questions you may have.

Note: A telephone connection is necessary in order to receive pay-per-view broadcasts and some sports programming. Complicated installations such as installing long runs of cable, drilling through more than one outside wall, or installing special purpose dishes may result in additional fees.

DIRECTV Installation Guide - What You Should Know

Insurance Companies Life

Thursday, September 29, 2011

Dish Network Installation Guide

Dish network installation foxes most people keen on getting digital TV to their homes. While the installation is not actually difficult, people find it tough due to various factors such as lack of clarity in the user manual. This guide is a step-by-step manual to dish network installation, and will hopefully help you get the system installed so that you can watch your favorite channels.

Not many people know that you can install the system inside your home, in case there is no space to put the dish outside. You will need a drill, nuts and bolts, screwdriver, compass, hammer, bracket for mounting, cement and level. Here is how you can put up the system as your guide.

Dish Network

Putting Up The Dish System

1. You have to know the meridians for your home - the longitude and latitude. For that, you need to use a GPS enabled machine. You can even go online and look up the position of your home.

2. Once you have your exact location, you have to go online and see which satellite can beam signals closest to where you are.

3. Mark a position where the system faces south. It should not be blocked by walls, wires, towers or other constructions.

4. Now go through the user manual carefully. Install the system as directed.

5. The coaxial wire supplied with your dish system has to be attached to the receiver. Once this is done, the satellite dish and receiver are connected.

6. Hook up the receiver to the TV set.

7. See if the TV is receiving the signals via the satellite dish system. You may need to use the signal meter to see if the signal is strong enough. The strength of the signal should read at least 60.

8. Once you are sure that the dish network installation has gone well, you need to adjust the dish according to the height of your location. This can be done by shifting the dish up or down little by little, until the height indicator is on a level with the elevation number.

Professional Installation

Try dish network installation guide by yourself, only, if you are sure that you have the skills to mount dish systems. It is always a good idea to ask a neighbor or friend who has installed the system, to help you. If that is not possible, ask for professional help. Once the installation is complete, you will be able to enjoy watching your favorite channels.

Dish Network Installation Guide

personal injury lawyers asbestos attorneys